بحث عن كتاب
كتاب Linear Deflection of Laminated Composite Plates using Dynamic Relaxation Method لosama mohammed elmardi suleiman

تحميل كتاب Linear Deflection of Laminated Composite Plates using Dynamic Relaxation Method PDF

سنة النشر : غير محدد
عدد الصفحات : غير محدد
عن الكتاب : Dynamic Relaxation (DR) method is presented for the analysis of geometrically linear laterally loaded, rectangular laminated plates. The analysis uses the Mindlin plate theory which accounts for transverse shear deformations. A computer program has been compiled. The convergence and accuracy of the DR solutions of isotropic, orthotropic, and laminated plates for elastic small deflection response are established by comparison with different exact and approximate solutions. The present Dynamic Relaxation (DR) method shows a good agreement with other analytical and numerical methods used in the verification scheme. It was found that: The convergence and accuracy of the DR solution were dependent on several factors which include boundary conditions, mesh size and type, fictitious densities, damping coefficients, time increment and applied load. Also, the DR small deflection program using uniform meshes can be employed in the analysis of different thicknesses for isotropic, orthotropic or laminated plates under uniform loads in a fairly good accuracy. .
أعلان

نبذة عن كتاب Linear Deflection of Laminated Composite Plates using Dynamic Relaxation Method

كتاب Linear Deflection of Laminated Composite Plates using Dynamic Relaxation Method

Dynamic Relaxation (DR) method is presented for the analysis of geometrically linear laterally loaded, rectangular laminated plates. The analysis uses the Mindlin plate theory which accounts for transverse shear deformations. A computer program has been compiled. The convergence and accuracy of the DR solutions of isotropic, orthotropic, and laminated plates for elastic small deflection response are established by comparison with different exact and approximate solutions. The present Dynamic Relaxation (DR) method shows a good agreement with other analytical and numerical methods used in the verification scheme. It was found that: The convergence and accuracy of the DR solution were dependent on several factors which include boundary conditions, mesh size and type, fictitious densities, damping coefficients, time increment and applied load. Also, the DR small deflection program using uniform meshes can be employed in the analysis of different thicknesses for isotropic, orthotropic or laminated plates under uniform loads in a fairly good accuracy. .


هذا الكتاب من تأليف osama mohammed elmardi suleiman و حقوق الكتاب محفوظة لصاحبها

تحميل
التحميل حجم الكتاب
تحميل غير محدد فى الوقت الحالى
أضافة مراجعة
0.0 / 5
بناء على 0 مراجعة
1 (0)
2 (0)
3 (0)
4 (0)
5 (0)
كتب ذات صلة